detail produk

Rumah > Produk >

15-micron laser-etched, silver PET transfer film is used for anti-counterfeiting and decorative purposes on cigarette packaging.

Produk

15-micron laser-etched, silver PET transfer film is used for anti-counterfeiting and decorative purposes on cigarette packaging.

MOQ:	3
harga:	1.3-1.6usd/kg
Kemasan standar:	dengan menggulung palet
Periode pengiriman:	7-15 hari
Metode Pembayaran:	T/T
Kapasitas Pasokan:	1000/bulan

Informasi Detail

Deskripsi produk

Informasi Detail

Tempat asal

Nama merek

Sertifikasi

Nomor model

PELIHARAAN

Nama Produk:

hewan peliharaan perak dengan lapisan primer

Transparansi:

metalized atau bening atau laser

Ketebalan:

15mik

Warna:

Perak dan bening serta warna laser

Mencicipi:

Dapat diterima

lebar:

600mm/700mm/1050mm/1090mm/1280mm/1520mm

Panjang:

4000m/6000m/1000m/12000m

3920209090

Deskripsi produk

15-micron laser-etched, silver PET transfer film is used for anti-counterfeiting and decorative purposes on cigarette packaging.

The application of primer coating to PET film is a crucial process that solves adhesion problems through a combination of chemical and physical mechanisms. Its core value lies in improving adhesion and process compatibility, supporting the high-quality application of PET in printing, packaging, electronics, optics, and other fields.

15-micron laser-etched, silver PET transfer film is used for anti-counterfeiting and decorative purposes on cigarette packaging. 0

Core Process: Base film pretreatment → Graphic/metal layer processing → Composite transfer → Peeling and recycling → Post-processing
Base film and release layer: PET (high temperature resistance, precise positioning) or BOPP (low cost) is selected as the base film, and a release layer (silicone oil type) is coated to facilitate subsequent peeling;
Holographic molding: Holographic/laser microstructures are molded on the release layer at high temperature and pressure (130–150℃) to form anti-counterfeiting textures;
Vacuum aluminum plating: An ultra-thin aluminum layer (approximately 40–60nm) is vacuum-deposited on the molded surface to enhance the metallic feel and reflectivity. Local aluminum plating can also be used to create a镂空 (hollowed-out) effect;
Coating adhesive layer: A transfer adhesive (mainly water-based environmentally friendly adhesive) is coated on the aluminum-plated surface to ensure strong adhesion to the base paper;
Composite and transfer: The transfer film is laminated and pressed onto the cigarette pack base paper (mainly 200–230g white cardboard);
Peeling off the base film: After curing, the PET/BOPP base film is peeled off (recyclable), and the aluminum layer and holographic pattern are permanently transferred to the cardboard surface;
Post-processing: The transferred cardboard undergoes offset printing, hot stamping, die-cutting, and creasing to produce the finished cigarette label.

Other material clear or laser pet with primer coating ,pls contacting us.

15-micron laser-etched, silver PET transfer film is used for anti-counterfeiting and decorative purposes on cigarette packaging. 1